Home | About Nav-Aids Ltd | Products | Site Map | Search | Contact

Nav-Aids Catalogue

Commuter & Corporate

Transport & Civil

Eurocopter  |  Helicopters

Military

New

Air Data Accessories Kit

Airbus - A-319 / A-320 / A-321

Air Data Accessories Kit

Features Cleco Type Adaptor

New

Air Data Accessories Kit

Model ADA320-612 - Air Data Accessories Kit (Cleco type)

Contents

Pitot Adaptor (2) 

P/N P99320M1-4C

This pitot adaptor has been designed to fit pitot probe P/N 50620. Two seal pads on extension arms close the drain holes on the pitot tube. The adaptor is fitted with quick disconnect fittings.

Pre-Test Probe (2) 

P/N PT19932

This unit is used when it is necessary to verify the integrity of the pitot adaptor, hoses and air data tester. The probe is inserted into the pitot adaptor and pneumatic pressure applied to check for leaks.

Static Test Adaptor (2) 

P/N 33410A47-125-4

Two quick connect adaptors are supplied to be installed on the two main static ports on the left side of the aircraft.

The adaptors are connected to the aircraft by depressing the plunger and simply inserting the mandril into the center hole of the static port.

The A319, A320, A321 air data system employs electrical transducers inside the main static ports. Therefore the opposite static port does not require a blanking adaptor.

Alternate Static Test Adaptor (1) 

P/N 33410AB-125-4

This adaptor is for connection to the alternate static port in the nose area of the aircraft.

It is of the same design as the main static port adaptors, but the angle of its fitting is different.

Alternate Static Blanking Adaptor (1) 

P/N 33410ABB-125

This unit is used to cover the alternate static port on the opposite side of the aircraft. This hermetically seals the alternate static system, as it does not employ electrical transducers inside the static ports.

Suspension Arm Assembly (1)  

P/N 300-8971

This unit is used to support the static hose assembly when the main static adaptors are installed on the aircraft. The anchor nut installed above the upper main static port accepts the mounting screw of the suspension arm assembly.

Lubricating Fluid (1) 

P/N LF5050

This fluid is used to lubricate the glands of the pitot test adaptors.

It is recommended that a small amount be placed on the probe before adaptors are installed on the aircraft. The lubricating fluid will ensure smooth adaptor installation on to the pitot tube and will keep the seals moist.

Seal Kit (2) 

P/N SK320

Two sets of spare seals for the pitot adaptors are stowed in the case.

Pitot Test Hose Assembly (1)

P/N 320-7270

This hose assembly consists of three hoses and is connected to each pitot tube and the air data tester. Double acting quick disconnect fittings allow the connection of a single pitot adaptor. The quick disconnect fittings are self sealing when not connected.

Static Test Hose Assembly (1)

P/N 320-5160

This hose assembly connects the static test adaptors to the air data test set. Double acting quick disconnects are incorporated into each leg of the hose assembly. This permits connection of either one or two static test adaptors.

Alternate Static Test Hose Assembly (1)

P/N 320-105

This hose assembly is to connect the air data tester to the alternate static test adaptor.

Manual (1)

P/N 444-320-612

An instruction manual with parts list is supplied with each Air Data Accessories Kit.

Home | About Nav-Aids Ltd | Products | Site Map | Search | Contact

Nav-Aids Catalogue

Commuter & Corporate

Transport & Civil

Eurocopter  |  Helicopters

Military

Web Services by